Essential oil extractor 12 liters - Spring

€525.00
€498.75 Save 5%
Tax excluded
The extractor for essential oils is constructed entirely of stainless steel and equipped with all the components in order to extract.
Quantity
Last items in stock

The extractor for essential oils (commonly called alembic, or distiller) is totally made of stainless steel and is equipped with all the components in order to extract the essential oils:


  • heating boiler

  • upper and lower grille

  • stainless steel connection pipe of steam

  • PYREX glass '5 bubbles' cooling burette

  • connection tube cooling system

  • user manual and instruction


The distiller is used to extract essential oils from medicinal plants using the steam current. It can be used to process all the fresh and dried plants whose oil can be extracted by steam current.
Here are some of the various plants that you can distill with the extractor: lavender, mint, rosemary, thyme, bay, sage, oregano, chamomile, rose, eucalyptus, lemon balm, savory, wormwood, basil, herb verbena, cypress, pine, mountain pine, helichrysum, geranium, eucalyptus, juniper, mastic, marjoram, parsley, rue, turpentine, valerian, etc..


How to use our essential oil extractor Spring



  1. Place the water in the boiler. The water must not exceed a level established by the bottom grid previously settled at the bottom.

  2. Place the plants in the distiller avoiding the possible formation of preferential exit ways for steam.

  3. Place the top grill and close the lid of the distiller.

  4. Fasten the connection pipe of steam and the '5 bubbles' glass burette.

  5. Turn on the heat source. Operate the cooling system (gas, electric or induction stove) when the temperature on top lid termometer reaches 50°C.

  6. Upon reaching the temperature of about 100°C, the steam will capture the essence from the plants, and the nit wil be separated due to the difference in specific weight between the water and the oils.

  7. After about one hour, check the growth of the oil level in the collecting cylinder.

  8. Turn off the heat source when the increase is negligible.

  9. Recover the oil extracted through the separating funnel (accessory not included) and clean the distiller.




PLEASE NOTE THAT:
The sale and running of distillers is ruled
by D.M. 27 March 2001 n. 153

E0134
3 Items
New

You might also like